Wednesday, December 18, 2019

New Press Release - Learn About DoorGuard Plus

We have published our latest press release detailing our updated DoorGuard Plus temporary door protection. We have updated and improved the product, now allowing us to ship it via UPS Ground and other standard ground shipping methods.

DoorGuard Plus retains all of the popular features present on standard DoorGuard, but expanded for use on wider commercial doors. DoorGuard Plus features hardware cutouts allowing it to be used on doors that are already hung, and attaches to doors with the same elastic band system as standard DoorGuard.

To read any of our previously published press releases, visit the press releases tab of our site linked here. For more information about DoorGuard or any other surface protection products, email us at or visit

Friday, December 13, 2019

Keep Your Home's Finishes Protected This Holiday Season

With the holiday season comes holiday parties and whole lot of clean-up. With this in mind, we have written and published a new article detailing how surface protection products can be used to minimize clean up and to minimize any damage caused from high traffic areas.
Floors, stairways, bathroom fixtures, and kitchen finishes can all be damaged by the heavy-use they experience during the holiday season. This commonly leads to hours of clean-up time and potentially some cost in fixing and replacing fixtures. Fortunately taking a few small surface protection steps can prevent this costly holiday headache. Rolling out carpet film on floors and stairs, using shoe covers for holiday home tours, and covering toilet fixtures are just a few of the easy steps detailed in this new article.

To read our entire catalog of published articles, visit the "Published Articles" page of our website linked here.  Learn more about surface protection products by emailing us at or visiting our website

Friday, December 6, 2019

New and Improved DoorGuard Plus In Stock and Easier Than Ever to Ship

Our new DoorGuard Plus features a new two-fold perforation system that now allows us to ship DoorGuard plus in smaller quantities and via UPS Ground shipping. This will allow customers to order DoorGuard Plus in bundles of up to four, and as few as two.

DoorGuard Plus is a larger version of our popular product DoorGuard. Designed for hospitals, commercial projects, and other projects featuring wide doors, DoorGuard Plus can protect doors up to 48" wide. Featuring perforations for door hardware and attachment bands, DoorGuard Plus is the only XL sized door protection on the market. DoorGuard Plus can be ordered in widths from 3'4" wide to 4' wide. DoorGuard Plus can be ordered in heights of 8' and 7'.

Previously DoorGuard Plus was only available for will-call pickup, direct palletized shipping from the manufacturing facility, or palletized shipment from our warehouse. These methods meant DoorGuard Plus wasn't feasible to order in small quantities. However with the new and improved DoorGuard Plus we can ship small quantities ordered via our website.

Note that the minimum order quantity for the new and easy to ship DoorGuard Plus is two; this ensures that the bundle of DoorGuard can be shipped without being bent and mangled in transit.

To learn more about DoorGuard Plus, door protection, or any other surface protection products email us at or visit

Friday, November 22, 2019

Trimaco Floor Protection Now Available Online

Our website now features a few new products. We've been adding Trimaco's popular products to our line, and have now expanded our floor protection offerings with X-Board, FloorShell, and SuperTuff Mats.

FloorShell and X-Board are comparable products to RamBoard and RamBoard's Painter's Board fiber based floor protection rolls. X-Board is a 35" x 100' roll of floor protection designed to be lighter weight than RamBoard and FloorShell, but stronger than builders paper. It is a breathable surface protection product, and it is very easy to cut to size and to bend around surfaces. FloorShell is a thicker and stronger paper based floor protection. It's 45 mils thick and is offered in 38" x 100' rolls.

SuperTuff Protective Mats are heavy duty slip resistant mats designed to repel spills and other common jobsite contaminants. SuperTuff Mats are a fabric based absorbent material that are also slip resistant, making them safe to walk on and ensuring builders don't have to rely on taping them down. Each mat is 3' x 6' long, 18 square feet in total.

All of these products are now in stock and ready to ship same day from our warehouse in Oregon. Trimaco also manages a number of warehouses around the country, so it's possible that some products can be shipped from locations close to your jobsite.

To learn more about SuperTuff, FloorShell, and X-Board, as well as any other type of surface protection, email us at or visit our website

Thursday, November 14, 2019

Trimaco SuperTuff Protective Mat Now In Stock

Here at Builders Site Protectrion, we're always looking out for new products to carry. In that vain we have now added Trimaco's SuperTuff protective mats to our catalog. These 3' x 6' mats are slip-resistant, absorbent, and leak-proof versatile surface protection mats.

So far we've provided SuperTuff Mats to a custom homebuilder in Pale Alto looking to prevent oil stains on a high-end custom driveway. SuperTuff mats are both absorbent and leak-proof, so preventing motor oil from staining concrete has been an ideal solution for them. Furthermore, SuperTuff Mats can be easily cleaned, extending their useful surface protection life. Each mat is sold individually, and retails at $23.88.
We carry the entire catalog of Trimaco's products, so if you are interested in any price quotes, samples, or further information on any products just let us know. We currently stock a number of Trimaco's products in our warehouse, and Trimaco can ship from a nationwide collection of their own warehouses to keep deliveries as quick as possible. Furthermore, we offer free freight on any order of Trimaco products over $1200.

To learn more about SuperTuff protective mats or any of Trimaco's products, or other general Surface Protection queries, email us at or visit

Thursday, November 7, 2019

Prepping for Mud With Adhesive Walk-Off Mats

With the return of winter weather comes the return of seasonal mud, and all of the effort associated with keeping jobsite floors clean. Whether a jobsite is a custom home or a hospital, walk-off mats are the easiest way to prevent that mud and dirt from being tracked on site.

Walk-off mats are a quick and easy way to prevent dirty jobsite floors. Featuring 30 easily removable pages, walk-off mats remove dirt from boots. Once a page is covered in mud and no longer sticky, it peels off and the next sticky page is ready.

Two variations of walk-off mats are available. We offer a walk-off mat Starter Kit, which features 30 sticky pages and a non-skid plastic base. These are ideal if it is your first time purchasing walk-off mats, or if you are using them in a place with retail traffic. We also offer walk-off mats in bulk, which feature four packs of 30 pages, and do not come with the plastic non-skid baseplate. Once you have a baseplate, ordering the bulk refill packs in the most cost effective way to keep mats on site.

In addition to walk-off mats we carry a wide array of floor protection items as well as shoe covers. Clean & Safe is a great way to keep mud off of hardwood floors, and polyethylene shoe covers are an affordable and quick way to prevent muddied boots from tracking mud into a jobsite. Combining walk-off mats with a water resistant floor protection and shoe covers is a surefire way to keep a jobsite as clean as possible.

To learn more about walk-off sticky mats or any other surface protection products visit our website or email us at

Tuesday, October 22, 2019

View Our New Instagram Account, @builderssiteprotection

We have created an all-new Instagram account to document new products, products in use, and other interesting displays of ways that Builders Site Protection can help your jobsite. The new handle is @builderssiteprotection

We would love for any customers or interested parties to reach out to us via Instagram, and we look forward to interacting on yet another platform.

To learn more about surface protection products, email us at or visit our website

Wednesday, October 9, 2019

Healthcare Construction and Surface Protection

Medical construction projects are work that more and more companies are being contracted to complete. Healthcare construction has been steadily growing in recent years, and for 2020 there is yet another 4% increase forecast. Not only is healthcare construction relatively recession-proof, it is being carried out nationwide and isn't specific to fast-growing metro areas.

To keep up with this growing need, Builders Site Protection has begun to focus on surface protection and equipment needs specific to hospital and medical projects.
Edge-Guard Barrier Panels
We have been extremely proactive in providing Edge-Guard barrier systems to general contractors all across the Northwest. Hospital projects in Eugene, Salem, Portland, and Seattle are all now using Edge-Guard barriers on site. Edge-Guard is a configurable system that allows builders to create a negative air system that can suit any size project. Everything from negative air ports, locking doors, air pressure monitor gauges, and different color panels are available.

Mobile Containment Units are a required tool for electricians, HVAC companies, and other installation specialists working in hospital environments. Containment Units can be both bought or rented through Northwest Abatement Rental and are the quickest and easiest way to set up a negative air workspace.
Containment Units. For sale or rent
Other common healthcare construction supplies include walk-off sticky mats and other common dust containment supplies such as Poly Grabber ceiling clips. Fire-rated floor protection options such as CoverGuard and the non-fire resistant CoverGuard Economy are also both popular options on hospital and healthcare construction projects.

To learn more about protecting hospitals and other surface protection needs, email us at or visit our website

Thursday, September 26, 2019

View Our Most Recent Press Release detailing VersiShield and StringerShield

We have published a new press release detailing the addition of Safety Maker's VersiShield and StringerShield products to our product line. These two new products form bases for temporary OSHA-approved guardrails to be erected.

StringerShield bases in place
Find all of our published press releases on the "Press Release" page of our main website. There, every release we have published can be found, many of which are a great resource for learning about new surface protection products, as well as being a source of many customer testimonials.

These two products are the latest addition to our line of Safety Maker jobsite safety supplies. In conjunction with Safety Boot, we now carry products that can be used to create guardrails on nearly any type of floor, stair, and surface.

To learn more about VersiShield, StringerShield, or any other surface protection products email us at or visit our website

Wednesday, September 18, 2019

Custom Edge Protection Sizes Available

We currently stock 30" and 60" edge protection for interior edges, corners, and other surfaces. However, we have the ability to cut Edge Protection into any size under 60". For smaller finishes such as vanities, parts of countertops, and other irregular interior corners we can provide custom sizing for edge protection. This saves builders on-site the time of cutting them to size themselves. 

For pricing and availability reach out to us with the size of edge protection you needs as well as the quantity needed. Our website only lists the 30" and 60" sizes, as we can't list every potential edge protection size. Furthermore, we can accommodate custom quantities of custom sized Edge Protection for your project. So if you have specific needs please contact us for further information.

To learn more about Edge Protection or any other surface protection products email us at or visit our website
#EdgeProtection #SurfaceProtection #EgdePro

Thursday, September 12, 2019

Builders Site Protection Now Distributing VersiShield and StringerShield Guardrails

We are excited to announce that we have added Safety Maker's new VersiShield and StringerShield to our ever-growing catalog of surface and jobsite protection products. Both of these Safety Maker items provide a reusable base to quickly erect OSHA-compliant guardrail systems for residential and commercial stairs under construction.

VersiShield clamping system
VersiShield is an easily adjustable clamp to quickly build stair rails. The base of VersiShield swivels, allowing it to be mounted below the stair tread, as the top of the system is fixed in place on the stair tread itself. Using a bolt VersiShield becomes clamped in place, allowing a 2x4 based guardrail to be quickly placed into the system. VersiShield is OSHA compliant and saves builders money due to its quick installation and it re-usability. 

StringerShield stringer clamp system
StringerShield is a simpler rail system for use on pan stairs. It is a non-adjustable clamp that attaches to open stringer stairs. StringerShield is compatible with various sizes of stringers to create an OSHA certified rail system. Like VersiShield, StringerShield is built to allow standard 2x4 pieces to quickly erect the rail system. 

Both of these products are sold by the single unit. Furthermore, both units are reusable, ensuring that builders save money in the long run. To best make these products reusable, they are powder coated to create the longest-lasting finish possible; making these products industrial grade in strength. 

To learn more about Safety Maker products that we carry, email us at or visit our website #versishield #stringershield #guardrails

Thursday, September 5, 2019

Edge Protection Being Used in Innovative Peavy Hall CLT Project at Oregon State

We have provided surface protection to the new Peavy Hall building being constructed by Andersen Construction on Oregon State's campus. The remarkable thing about this new forestry-focused building is that it is pioneering the commercial use of cross-laminated timber (CLT). Because this building will house Oregon State's forestry program, CLT and wood finishes were used throughout the building.

Peavy Hall Forestry Center at Oregon State University
To protect interior and hallways edges from damage, Edge Pro was extensively used throughout the interior. Hallway and interior edges are extremely prone to damage due to how exposed they are. Edge Pro is a low-cost reusable corner and edge protector for interior finishes. Edge Pro is available in two sizes, 2" x 2" x 60", and in the Edge ProTect size 4" x 4" x 48".

Edge Protectors
To learn more about protecting wood finishes, or about any other surface protection products, email us at or visit our website

Wednesday, August 28, 2019

New Article Posted - Learn About Custom Branded Surface Protection

We have just published our latest in a long line of articles. This new article titled "Using Custom Branded Surface Protection to Drive Referrals" dives into the variety of surface protection products that can be custom printed and custom branded; and further details how this can benefit builders.

Custom printing available on Surface Liner Vapor
To read our entire catalog of published articles, visit the "published articles" tab on our website. We have published a wide array of articles on a variety of platforms, and covering a large range of topics. Articles are a great resource to learn more about surface protection and its benefits.

To learn more about custom printing options for surface protection, or for any other surface protection related inquiries, email us at or visit our website

Thursday, August 15, 2019

Read Our Latest Press Release About Edge Guard Temporary Barrier Systems

We have published a new press release that details our involvement in Andersen Construction's ongoing work at the Legacy Emanuel Hospital in Portland, Oregon. The projects happening at the hospital are all dependent on using the Edge Guard barrier system that we specialize in and carry.

Edge Guard Barriers are the quickest and easiest way to create a negative air barrier for work in hospitals and in other dust-sensitive applications. Edge Guard barriers are not only more professional in appearance, but they are also cost effective as they can be reused, which temporary single-use plastic sheeting solutions cannot. Edge Guard panels can combine in an endless number of arrangements featuring doors, HEPA discharge ports, and corners.

To read our entire catalog of published press releases visit the "press release" page of our website linked here. This page features every press release that we've published, and is a great resource to learn more about specific products and their practical applications in commercial and residential construction.

To learn more about Edge Guard temporary barrier systems and other surface protection products email us at or visit us at

Thursday, August 1, 2019

New Custom Surface Protection Printing Options Available

Builders Site Protection has long provided customers with custom printing options to best suit their surface protection needs, and to best display to customers their dedication to protecting finishes. We're excited to announce that we now can offer custom printing options for our most popular hardwood floor protection product, Surface Liner Vapor.

Surface Liner Vapor is a breathable floor protection best suited to interior stairways and hardwood floors. Because it is breathable, there is no risk of Surface Liner leaving any unsightly curing lines, and it can be laid upon floors the moment they are installed, preventing any damage that may occur during a curing period. Surface Liner Vapor is available in 54' long rolls and 164' long rolls

Currently, Surface Liner Vapor features our company information, pictured above. However, with a minimum order of two pallets of SLV floor protection, 40 rolls in total, your custom logo and company information can be printed at no cost. Custom printed floor protection is a great way to display to customers your commitment to keeping their new and remodeled homes clean and blemish-free. 

We also feature custom printing options on popular products like Toilet Sheath, which is a great option for large-scale residential builders. Visit our website and call us for more information about custom printed toilet protection.

To learn more about Surface Liner Vapor and other custom printing options, email us at or visit our website
#floorprotection #surfacelinervapor #customprinting

Wednesday, July 24, 2019

Walk-Off Mat Floor Protection On Sale Now

For years one of our most popular floor protection products has been sticky Walk-Off Mats. These adhesive floor mats collect and trap dirt and debris from boots before they get tracked onto a jobsite. Residential builders often place walk-off mats at the base of all doorways exposed to heavy foot traffic, keeping the interior floors cleaner  as they do so.

For a limited time only, the standard four pack of adhesive walk-off mats will be discounted in a website-only special sale. Walk-off mats are now priced at $88.20, a discount of about 10%.

Walk-off mats are available in a pack of four and an individual pack of one called the Starter Kit. The starter kit features a skid resistant plastic base that hold the sticky mats in place. We often recommend to first purchase the starter kit, then supplement it with additional sheets as needed from the standard four pack.

To learn more about sticky walk-off mats or any other types of floor protection, email us at or visit
#floorprotection #walkoffmats #dustcontrol

Tuesday, July 2, 2019

Learn How to Set Up A Mobile Containment Unit In Our Latest Video

Our latest video release details how to set up and install a Mobile Containment Unit (rental options available at Northwest Abatement Rental). Intended as a tool for customers and renters alike, this how-to video significantly speeds up the installation and use of an Abatement Technologies AG 3000 Soft HEPA Cart.

Mobile Containment Carts are used in applications that require negative air pressure for dust and debris containment. Anything from asbestos removal to typical electrical work in a hospital necessitates the use of containment units.

Capable of working on ceilings up to 10' tall, mobile containment units can be easily and quickly moved from one location to the next via wheels. The height of containment carts can be easily and quickly adjusted  as well, making wheeling the unit from one location to another and changing its height extremely simple.

This video can be seen in the embedded page above, or can also be found on the Builders Site Protection YouTube page, along with a number of other surface protection related items.

To learn more about mobile containment units, visit our websites and or email us at

Wednesday, June 26, 2019

EZ Cover Can Handle Your Concrete Protection Needs

Breathable, durable, and scratch-proof on concrete, EZ Cover is the most thoroughly capable concrete protection available to builders. Strong enough to withstand heavy equipment and soft enough not to trap debris that can scratch a concrete slab, EZ Cover is an ideal concrete surface protection material. 

EZ Cover floor protection works well with most common types of concrete and floors. Cement, decorative concrete, marble, terrazzo, hardwood, and just about anything else is compatible with EZ Cover. Further, EZ Cover can be used to protect freshly lain materials that need time to cure.

Because EZ Cover is breathable, there is no risk of unsightly curing lines and curing problems for fresh floors. Curing floors need the ability to off-gas their fumes in order to be installed correctly. Floor protection products made from plastics don't have this ability, making their use on fresh flooring materials a big risk.

EZ Cover is available in 48" x 50' rolls, totalling 200 square feet each. Single rolls are currently available for $144.50/each. We offer single rolls, as well as quantity discounts and freight shipping on pallet quantities. Contact us with your ship-to address and an email address for a full EZ Cover quote including price breaks and shipping costs to your jobsite or warehouse.

To learn more about surface protection products and information, email us at or visit our website

Wednesday, June 19, 2019

New Blue 6" Vinyl Trim Tape Now In Stock

Over the years we have had a number of builders and contractors ask us about adding a Blue Vinyl tape to our product line, and now we finally have.
Our new 6" tape is ideal for use on metal trim, thresholds, curtain wall components, and other custom shaped metal pieces. Each roll measures 6" x 108' feet, and is available in either single rolls, or discounted cases of 8 rolls.

Blue vinyl tape features UV blocking compounds, ensuring that after weeks of use it can still be cleanly removed from metal in one piece. Each roll of the tape is $15.95.

While Blue Vinyl Tape is rated for weeks of use, it is not quite as strong as our UV Threshold Tape, which can withstand 6 continuous months of sun exposure.

To learn more about 6" Blue Trim Tape or any other surface protection products, visit our website or email us at

Wednesday, June 5, 2019

View Our Latest Video About Toilet Sheath Surface Protection

To better raise awareness of our popular product Toilet Sheath, we have created a quick video detailing its benefits and its ease of use. This video is embedded below, and is also available on our YouTube page for viewing

Owner of Builders Site Protection, Pat Mullen, walks viewers through installing Toilet Sheath on their project. Also included in the video is more information about custom printing Toilet Sheath, a very popular option for large scale production and commercial builders.

We have a host of videos related to surface protection and using finish protection products on our YouTube page linked here. Carpet Film, Protecta Foam cabinet protection, Threshold Tape and more can all be found on our channel.

To learn more about Toilet Sheath or any other surface protection products, visit our website or email us at

Wednesday, May 29, 2019

Learn About Negative Air Filtration In Our Latest Article

Our latest published article pertains to HEPA filtration and the numerous uses of Negative Air Filtration on jobsites. Using negative air systems in construction can be extremely beneficial any time jobsite dust is critical to prevent. 

Covering manufactured negative air anteroom systems like EdgeGuard and simpler temporary plastic sheeting walls like ZipWall, this article is a quick and effective summary of negative air options and benefits.

All previously written articles can be found on our website's published articles page. To learn more about negative air products, surface protection, or anything else pertaining to the article, visit our website

Thursday, May 16, 2019

RamBoard Stair Armor Now In Stock

Stair protection is now in stock and available from Builders Site Protection. RamBoard Stair Armor is the newest stair protection brought to market, and it's both affordable and easy to use. Stair Armor features indentations that easily fold into place and is held down by masking tape.

Available by the case or in packs of six, Stair Armor can accommodate and project, large or small. Stair Armor is 34" wide and features an adjustable guard that can work with any size toe-kick. This stair protection features a padding on the bottom to ensure that nothing trapped under the Stair Armor can scratch stairs.

Stair Armor also shares many features with RamBoard. Like RamBoard, Stair Armor is made from a paper-based board material, and it features a spill guard which prevents against light water damage. It is non-staining and fully recyclable; effectively RamBoard for stairs.

Stair Armor is offered in packs of 6, which cost $39.99, however if you act quickly you can purchase a bundle of 6 Stair Armor pieces on sale for $30.99. We can also provide much larger quantities at a marginal discount, such as cases of 36 packs and pallets of 144 packs. Call or email us for more information about bulk pricing and shipping options. Check out our main website for more information about Stair Armor.

To learn more about Stair Armor or any other products we provide, please email us at or visit our website

Friday, May 3, 2019

Builders Site Protection will be in Texas this week

Builders site Protection's president Pat Mullen will be visiting and meeting with builders in Texas from May 7th to the 10th. She will be working in Austin, San Antonio, and Houston.

This is a fantastic opportunity for builders to learn about surface protection products. Whether builders have finish damage occurring and need help protecting them, or if they are interested in quotes and product samples, let us know so we can help protect surfaces at your project.

It's not uncommon that builders introduce problems that require surface protection solutions during our sales visits. Products such as Utility Box Covers, Curtain Wall Protection, and Protecta-Foam were all developed in this way. A wide number of available products can be used in different and creative ways to protect finishes beyond what they were designed to, so please tell us if there are unmet surface protection needs on site.

To learn more about surface protection products or to schedule a meeting with Pat, please call us at 541-633-7793 or visit our website

Wednesday, May 1, 2019

Builders Site Protection's All-New Website is Live

This week we are excited to announce the launch of our all-new website. Featuring an upgraded back end, our new site will be faster and quicker to use for customers than ever before. Our new website remains

Customers with existing accounts on our website will be unaffected by any changes, ordering will remain easy, fast, and straightforward. All customers' order history has been imported into the new site, so saved shipment and payment information, regular orders, and order history will remain visible for regular customers.

The upgraded site will also feature new surface protection products such as RamBoard Stair Armor, which were not on the old site. Other products such as Edge Guard barrier panels also feature updated information. Over the next few weeks a number of other new products will also be added to our website for the first time, so follow our social media accounts for up to the date information on new product arrivals.

To learn more about surface protection products, email us at or visit our website

Thursday, April 11, 2019

Builders Site Protection is in San Diego

From April 11th to the 16th, Builders Site Protection President Pat Mullen will be in San Diego meeting builders and visiting jobsites.

Since Builders Site Protection's last outside sales visit to San Diego in October of last year, a number of new products have been added to our product line. Among them are Edge-Guard barrier panels and a wider array of hospital and negative air focused construction.

This is a fantastic opportunity for commercial builders to learn more about surface protection products. Pat has a huge selection of samples and product information, so now is the time for commercial builders in San Diego to learn more about protecting their finishes.

If you're interested in receiving more information about surface protection, pricing, or would like to receive a quote,  email us at or visit our website

Thursday, March 28, 2019

Trimaco X-Board Hardwood Floor Protection Now Available

Builders Site Protection is always focused on adding new and varied products. Our latest product addition is Trimaco's X-Board, a stronger floor protection alternative to building paper and scrim paper.

X-Board is a 35" x 100' (291 sqft) temporary floor protection designed with lightweight remodeling, painting, and restoration projects in mind. Breathable and spill-resistant, X-Board is an ideal surface protection for hardwood floors. X-Board is plyable enough to be wrapped around interior corners, cabinets, countertops, and other common fixtures. X-Board lays flat, and can be quickly taped into place.

Single rolls of X-Board cost $32.99, and discounts on pallet and case quantities are available upon request. For further information and price quotes including shipping email us at and we will respond shortly.

To learn more about X-Board floor protection or any other surface protection product, email us at or visit our website

Wednesday, March 20, 2019

Builders Site Protection Will be in Reno and Sacramento This Week

From Wednesday March 20th through Friday the 23rd, Builders Site Protection's president Pat Mullen will be working with and meeting builders in the greater Reno and Sacramento areas. Not only will she be meeting with existing customers, she will also be stopping at new jobsites and projects and introducing the company.

This is a great opportunity for builders to see surface protection products up close on their jobsite. Often times we have found that builders unsure of whether or not their custom finishes and features can be protected are pleasantly surprised when they see surface protection in person.

If you have a project in the Reno or Sacramento areas please let us know and we can schedule a visit to your jobsite. Pat will have a car full of surface protection samples to share with commercial and residential builders.

To learn more about surface protection products email us at or visit our website

Thursday, March 14, 2019

Read Our New Press Release About Floor Protection

We have published a new press release detailing the floor protection we are providing to W.G. Clark's new Main Street Flats project.

CoverGuard Economy floor protection is being used to protect concrete slabs from wheeled equipment such as scissor lifts and forklifts. Clean & Safe water resistant floor protection is being used inside units to prevent mud and water from getting tracked onto the new floors. Finally, walk-off mats are being placed at this projects entrances to limit the amount of dirt and debris entering the jobsite; minimizing  clean-up costs and finish damages.

The Main Street Flats project, slated to open in Fall
The Main Street Flats project is located in downtown Bellevue, Washington. This multi-use project will feature high end units as well as ground-level retail space.

To view all of our past press releases, visit the press releases tab here on our website's homepage.

To learn more about floor protection or any other surface protection products, email us at or visit our website

Tuesday, March 5, 2019

EZ Cover Concrete Protection Now Available in New Size

High end concrete, slab, and finish work is increasingly common on jobsites. As a result, the demand for a breathable surface protection that won't stain concrete is as high as ever. Enter EZ Cover; the leading breathable surface protection product designed for use on concrete. 

EZ Cover is now offered in 48" x 50' long rolls, providing 200sqft of concrete protection. Not only impact resistant, EZ Cover also offers spill protection. EZ Cover is made of two materials, a hard and durable outer layer, and a soft cloth-based layer that ensures concrete will not be scratched or dented by equipment and machinery. 

EZ Cover's new 48" size allows us to stock it in our warehouse, and makes the shipping rates for the product substantially cheaper. If you're interested in ordering EZ Cover, please contact us over the phone or through our website to receive price quotes with shipping included. We also offer product samples, and a number of other floor protection options for any type of project.

To learn more about EZ Cover concrete surface protection or any other surface protection, email us at or visit our website

Tuesday, January 29, 2019

Clean & Safe Floor Protection On Sale Now!

We are having a winter sale on one of our most popular floor protection products, Clean & Safe hardwood floor protection. Winter means lots of water, snow, and mud, so using a water-resistant floor protection can go a long way towards keeping a jobsite or project area clean. 

Clean & Safe floor protection is a water-resistant, plastic lined, recycled fiber based floor protection that's ideal for indoor use on hardwood and tile. sold in 40" x 164' rolls, Clean & Safe is an ideal solution for interior construction work.

Clean & Safe is particularly popular among painters and DIYers due to its re-usability and it's leakproof backing. Furthermore, because Clean & Safe is made of soft fiver material, it won't scratch hardwood floors if debris gets trapped beneath it, as heavy materials like masonite will.

To access the sale, visit the Clean & Safe or the floor protection pages on our website here.

To learn more about Clean & Safe floor protection, or any other surface protection products, email us at or visit our website

Thursday, January 17, 2019

Mobile Containment Units Now In-Stock

In addition to being the West Coast's premier surface protection provider, Builders site Protection also specializes in a wide array of abatement, containment, and remediation products and supplies. One such popular containment system is our Mobile Containment Cube.

Mobile Containment Units are are systems designed for work in an environment where contamination cannot happen, and negative air filtration is required. Typically construction and maintenance work in hospitals, labs, and high tech facilities necessitate the use of containment units. Containment carts such as the one pictured above are collapsible and mounted to mobile carts, allowing them to quickly be moved and stored.
Our Floor demo Containment Cube setup
Containment units are built to be compatible with negative air scrubbers. Using exhaust ports built into the containment unit, and air scrubber can be connected to the unit, providing negative air to prevent contamination, and providing HEPA filtration to meet strict contamination standards. Air Scrubbers are not included with containment units, however they can be ordered together, and we do carry a number of air scrubbers on our website.

Because systems like these are designed for hospital use, they meet extremely strict standards and regulations for fire resistance. This particular unit is certified with the CA Fire Marshall, and is compliant with CDC, AIA, NFPA, and CSA standards.

To learn more about containment units, surface protection, or any other abatement products, email us at or visit our website

Wednesday, January 9, 2019

Builders Site Protection Will Be In Seattle Next Week

As the latest effort in our outside sales efforts, Builders Site Protection owner Pat Mullen will be in the Seattle area on 1/17 and 1/18. She will be meeting commercial builders in arranged meetings, and also doing outside sales work to find new projects. 

We carry a number of new products since our last visit to many projects in the area, so this is a great opportunity to learn about what new finishes we can protect. If your project in the Seattle area is interested in using surface protection, please let us know so Pat can stop by with samples, catalogs, and to answer any questions you may have.

To schedule an appointment, learn more about surface protection products, or for any other questions you may have, visit our website, email us at or call us at 541-633-7793.

Friday, January 4, 2019

EZ Cover Temporary Concrete Protection Now In Stock

We are happy to announce that we now stock EZ Cover temporary concrete protection in our warehouse. This allows to more quickly ship EZ Cover to our customers nationwide. Whereas EZ Cover used to be shipped direct from the factory via freight, it can now ship same-day via UPS, getting it to your jobsite quicker than ever.

EZ Cover is the leading breathable concrete surface protection for newly-laid and curing concrete slabs. EZ Cover doesn't trap vapors onto the surface of new concrete slabs, allowing them to cure perfectly, cleanly, and while protected from damage. Because EZ Cover is breathable, it is the ideal surface protection for freshly poured slabs, decorative slabs, and other high end and interior concrete work.

EZ Cover remains in place on concrete, terrazzo, marble, and hardwood due to its composition. It features a soft bottom layer under a hard and impact resistant top layer. This soft bottom layer holds EZ Cover in place, greatly reducing the time and tape needed to secure surface protection. The strong top layer prevents equipment such as scissor lifts and dropped tools from damaging concrete slabs.

EZ Cover is sold in 4' x 50' rolls and can be easily cut down to size by the user if needed. Each 200sqft roll of EZ Cover is $144.50.

To learn more about EZ Cover concrete protection and any other surface protection products, email us at or visit our website